Revolutionizing Audio Control: Introducing the D&R AXITE Digital IP Console

Posted on 02 August 2023

The new AXITE system gives you an idea of how your studio(s) could become a digital studio platform with  the AXITE as a centerpiece. Clearly it is advantageous to capitalize on using one single but very flexible networked system like the AXITE to achieve this goal.There is a built-in security level to prevent unauthorized operation so that only those persons that have the knowledge of the system can control specific programming.

With the AXITE I/O RACK as the central core containing all the in/output sources you can build 4 complete Studios with the number of faders you need (in steps of 6). Per studio you need 1x AXITE main 6 fader control surface including the master CRM section and Play-out control section for jingles. And maybe a second or third 6 fader Extender unit. All control surfaces are linked with Ethernet cat-5 cable But you’ll also need signal sources for all of these faders, Mic Line and/or a couple of channels for your play-out system.  As an example, you can use D&R AIR CAST software that streams the audio over USB or via Cat 5 to our  16 channel AES67/USB  I/O card. In the control surfaces source select menu, you can select the outputs of the play-out system channels and assign them to the faders you want.

There is a choice between Rack-One (21 cards) and RACK-Two (42 cards) dependent upon how many input/output cards are needed for one or more studio’s Redundancy for power supplies can be added for both the fader panels and the I/O racks as an option.