AEROMOS QUATRO

SPECIFICATIONS

4x LED INDICATOR

4x MIC OUT (TO STUDIO)

4x MIC ON-AIR ARM

2 ways to switch the MIC ON-AIR SWITCH

Option 1: 5VDC control voltage (10mA)

Option 2: Open and closed contact

12VDC POWER INPUT

DESCRIPTION

Suitable for signaling of on-air lamps for microphones. e.g. YELLOWTEC MIKA ON-AIR MIC ARM.

ON-AIR: red
OFF-AIR: white

STATUS LED INDICATOR
The LED will light up when the 12VDC power supply is present.

12VDC POWER INPUT
Ratings: 12VDC (9~18 volt) at 250mA. The polarity is not important
Power supply is included, options: 115V/USA – 230V/AUS – 230V/EUR – 230V/UK

4x MIC OUT (TO STUDIO)
Microphone output; connect to your equipment with standard MIC cable
(XLR 3pin)
– PIN1: Ground (Shield)
– PIN2: Positive (Red)
– PIN3: Negative (Blue)

4x MIC ON-AIR ARM
Connect to the MIC ON-AIR ARM with standard MIC cable (XLR 5pin)
– PIN1: Ground (Shield)
– PIN2: Positive (Red)
– PIN3: Negative (Blue)
– PIN4: LED (Yellow)
– PIN5: LED (Black)

Previous Page | Main Page