Output power:
- 2 Ohms per channel: 1200W
- 4 Ohms per channel: 800W
- 8 Ohms per channel: 550W

Bridged output power:
- 8 Ohms bridged: 1600W
- 4 Ohms bridged: 2200W

Distortion for rated power:
- 1KHz/8: 0.015%
- 1KHz/4: 0.03%
- 20Hz-20KHz/8: 0.15%
- 20Hz-20KHz/4: 0.2%

Frequency Response: 20Hz-20kHz

Features:
- Gain adjustment ranging from -60dB to +6dB
- 5 Band Parametric Equaliser
- Phase adjustable from 0 and 180 degrees
- Crossover, slope and pass frequency of low pass and high pass both adjustable.
- Delay, measured in milliseconds, meters or feet.
- Limit, in terms of Hold Time, RMS time, Cst and Decay
- Sine wave test and noise test with a built-in signal generator
- TL series functions available by PC link.
- Save your settings on your computer and the settings will be automatically saved by amplifier
- CD included with Interface Software
- Cooling system: to ensure air stream from back to front, two fans (80) start at 45 degrees with speed auto adjusted according to temperature, and they do not work if temperature is below 45 degrees.
- Amplifier Protection: short circuit protection, subsonic frequency protection, RF protection, clip protection, soft start, overheat and over voltage protection. - Overload Protection: to ensure the safety of speakers, when the amplifier is turned on/off the protection avoids a current surge to the speaker system, when the amplifier outputs DC overload is automatically cut off, and a voltage limiting device prevents speakers from serious clipping.